Mechanical Tooling Wear-contact parts

Diamond Wear Components

Name: Diamond Wear Components
Brand: ADAMYX

For contacts that must hold their geometry under repeated mechanical use.

Diamond Wear Components, representative image — Representative image

Good to know

Contact shape and loading determine which surfaces need the highest finish.
Mounting must support the diamond without excessive local stress.
A finished wear part is defined by the contact geometry as well as the material.

Specifications

What we define for diamond wear components, with units and how each is typically measured. We confirm values for your application in technical review.

Request the datasheet Look up a term in the glossary

Dimensions & tolerances

Parameter	Unit	Typical test method
Profile, curvature or focal length	mm	Contact or optical profilometry
Lateral size, outline or diameter, and tolerance	mm	Optical measurement
Thickness and tolerance (bulk or layer)	mm	Micrometer or optical gauge
Drawing dimensions and tolerances	mm	CMM or optical measurement to drawing
Edge condition and chip limit		Microscopy inspection to drawing

Crystal & purity

Parameter	Unit	Typical test method
Crystal type, grade and grain size		Raman spectroscopy or microscopy

Surface & finish

Parameter	Unit	Typical test method
Surface roughness per side	nm Ra	Profilometry or AFM
Surface finish condition (as-grown, lapped or polished)		Visual inspection to drawing

Material properties

Parameter	Unit	Typical test method
Hardness and fracture toughness	GPa	Indentation (ISO 14577)
Wear resistance		Application wear test or pin-on-disc
Transverse rupture strength	MPa	Three-point bend test

Integration & packaging

Parameter	Unit	Typical test method
Operating load, medium and environment		Per application brief
Mounting interface, host fit and attachment		Per drawing
Operating temperature limit	°C	Per application brief
Certificate of conformance and traceability		Supplier declaration